Habitat TV

Featured Video

Scandi-inspired magazine rack
duration: 0:0:33

Looking for a way to keep your collection of beloved magazines tidy? This Scandi-inspired magazine rack is finished in a beautiful Resene stain and will look sleek and stylish in the living room.

You will need:

  • Resene testpot in Resene Colorwood Dark Oak stain
  • Resene testpot in Resene Chalk Dust
  • 2 pieces of plywood, 600mm long by 300mm wide by 20mm thick
  • Jigsaw
  • Masking tape
  • Paint brushes

Step one. Use the jigsaw to cut a middle section out of each pieces of the plywood, measuring 150mm long and 20mm wide.

Step two. Brush Resene Colorwood Dark Stain onto both sides of the plywood, and wipe the excess off with a cloth. Leave to dry.

Step three. Use the masking tape to outline the stripe pattern (if easier, mark it out using a pencil and ruler).

Step four. Paint over the masking tape with Resene Chalk Dust, and remove the tape.

Step five. Once completely dry, interlock the two pieces together, and fill with your favourite magazines and latest reads.

Project by Leigh Stockton.

Watch more videos

Category: create with paint

Published on Jul 27, 2017

Colours

register h icon  look book

Create your own mood boards of your favourite colours, photographs and information from habitat by resene.

Login or Register to get started!

×

register h icon  look book

Create your own mood boards of your favourite colours, photographs and information from habitat by resene.

Login or Register to get started!

×

Latest Habitat TV Videos:

register h icon  look book

Create your own mood boards of your favourite colours, photographs and information from habitat by resene.

Login or Register to get started!

×
Newsletter Signup

Get the best of habitat direct to your inbox.

Who are you? ( occupation)

×